I. 3D Printing Glue Curing Light Parameters
· Light Source Type: UV-LED
Lamp Chip Model: 45mil - 3W Chip
· Voltage Range: AC 90V - AC 260V, 50Hz
Heat Dissipation Method: Aluminum Alloy Heat Sink + Air Cooling
Irradiation Distance: Recommended 3 - 5CM. The closer the distance, the faster the curing speed.
· Ambient Temperature: 5°C - 42°C (Operating Environment)
Relative Humidity: ≤ 85%
II. Product Application Scope
3D Printing Glue Curing Light has a wide range of applications and can be used for various soft and hard materials such as glass, plastic, metal, paper, wood, leather, LCD screens, PCB exposure, electronic components, etc. Specific applications include:
Shadowless glue, UV crystal drop adhesive, UV photosensitive resin, UV green oil, UV ink screen printing, UV exposure, ancient blue printing transfer, LED-specific UV varnish curing; it can also be used for anti-counterfeiting verification, fluorescent decoration, fluorescent flaw detection, stage and bar decoration, etc.
III. 3D Printing Glue Curing Light Advantages
Air-cooling cooling: Large fan active heat dissipation, significantly extending the lifespan of LED lights
Strong light: High energy, stable light transmission, uniform irradiation, short curing time (several seconds, far exceeding traditional mercury lamps)
Ultra-low energy consumption: Power consumption is only 20% of high-voltage mercury lamps, and the luminous efficiency is more than 10 times that of mercury lamps
No heat radiation: Cold light source without IR emission, the surface temperature of the illuminated product is ≤ 5°C (traditional mercury lamps 60-90°C)
No preheating required: Instant lighting, reaching 100% UV output immediately, improving work efficiency
Long service life: Service life ≥ 10,000 hours, unaffected by the number of switches, saving replacement costs
Green and environmentally friendly: No mercury, no ozone generation, safe and environmentally friendly, can replace traditional light sources
How to choose different wavelengths 365nm or 395nm?
The key lies in the type of glue you use and the curing thickness. Don't just consider the price or brightness. Choosing the wrong wavelength can result in the surface of the glue drying while the inside remains soft.
What's the difference between wavelength and energy?
1. 365nm has higher energy: The shorter wavelength means higher photon energy, which enables faster activation of the photoinitiator and is suitable for materials with high sensitivity to light exposure.
2. 395nm has deeper penetration: The longer wavelength has better penetration in transparent or semi-transparent glue layers, and is less likely to be completely absorbed by the surface layer, making it suitable for curing thick glue layers.
3. The visibility is different: 365nm is almost invisible, while 395nm emits a pale purple-blue light. It is easier to see the irradiation position during operation, but don't mistake visible light for strong penetration power.
Tip: the specific wavelength to choose also depends on the characteristics of the avmaterial. if you have any questions, please contact customer service.
IV. Precautions
This product emits UVA long-wave ultraviolet rays (within the safe range), but it is not allowed to be exposed to the eyes and skin for a long time. For long-term use, wear UV-blocking glasses.
Do not disassemble or modify the equipment privately. Otherwise, normal after-sales service will not be available, and there are potential safety hazards.
The working environment should be dry, with a temperature of ≤ 42°C. Avoid enclosed and humid places to prevent affecting the equipment lifespan.
The equipment should not work continuously for more than 12 hours. Adequate rest periods can extend the lifespan.
Avoid using the equipment in environments with a lot of dust, heavy oil smoke, or severe vibration.
Do not touch the focusing cup and LED light beads directly with your hands. If there is dirt, turn off the equipment and wipe it dry with anhydrous alcohol.
Do not repeatedly bend the power cord. If the irradiation head breaks, replace the power cord as a whole.