How to choose the power of an UV curing lamp

Data: 2026-06-05
The power of UV curing lamps mainly depends on the material thickness, curing area and production speed. Generally, for household use or small items, choose 10W-50W; for regular industrial use, choose 100W-200W; for large areas or thick coatings, choose 200W or higher power density lamps.

What factors determine the power size?
1. Material thickness and type: The thicker the adhesive layer or the higher the viscosity, the greater the power required to ensure that the light can penetrate to the bottom; otherwise, the surface may dry while the inside is still soft.
2. Curing area size: The larger the area, the higher the total power required to ensure uniform illumination and avoid dead corners where some areas are dry while others are not.
3. Production line speed: The faster the production line speed, the higher the energy required per unit time, and a higher power lamp needs to be matched; otherwise, the product may be dried before it is finished.
4. Difference in light source type: LED lamps have higher efficiency, and under the same effect, the power value is lower than that of traditional mercury lamps. For example, an 800W LED lamp may have the same effect as a 5.5kW traditional mercury lamp.

Power recommendations for different scenarios
1. DIY or small-scale precision work: Such as phone screen protection or small jewelry glue application, 10W-50W LED point light sources or small surface light sources are sufficient. Too bright may easily damage delicate components.
2. Regular industrial production or medium-sized areas: Such as PCB coating or ordinary glue bonding, 100W-200W LED surface light sources are more suitable, balancing speed and cost.
3. Large area or thick coating curing: Such as large glass bonding or thick ink layer, a need for 200W-600W or higher power, or choose a lamp with a power density of 80-120W/cm to ensure deep curing.

What to pay attention to when choosing power?
1. Pay attention to power density: Not only the total wattage, but also the power per unit length (W/cm) of the lamp (commonly 80-200W/cm), this indicator can better reflect penetration power than the total power.
2. Heat dissipation design: High-power lamps generate a lot of heat, poor heat dissipation will affect lifespan and curing effect. Choose lamps with fans or water cooling design; otherwise, the lamp is prone to burning out.
3. Wavelength matching: No matter how high the power is, if the wavelength is not matched, it is useless. Common wavelengths are 365nm and 395nm, which need to be consistent with the requirements of the glue, and ask the glue manufacturer before purchase.

Contact Us

  • Email:Info@ttled.com
  • Mobile: +86-13760309508
  • Add: 9th Floor A2 building,New Era prosperity,Shilong,Shiyan,Shenzhen,China
Copyright © 2008-2027 Shenzhen TTled Lighting co.,Ltd ( China Factory) All rights reserved
wx

ID:TTLED_COM

×