
UV led curing lights introduction2026-06-02Ultraviolet UV curing lamp:
① Core classification - Medium-pressure mercury lamp: The medium-pressure mercury lamp is the mainstream type of traditional UV curing lamp. The lamp body is filled with mercury vapor and inert gas. During operation, it excites mercury atoms through electrode discharge to generate ultraviolet rays. Its wavelength coverage is wide, with output within the 200-450nm range. Among them, ultraviolet rays with wavelengths of...
What is better 365nm or 395nm2026-05-30
There is no absolute good or bad. The key is what you use it for - professional detection should choose 365nm, while for daily household use, 395nm is sufficient.
What are the differences between the two?
1. The color of the light reflected is different: 365nm basically shows no purple color, the light is dim and bluish-white, and it wont interfere with judgment; 395nm has a distinct purple halo, its brighter but is prone to masking flu...
UV Light Curing Technology and Principles2026-05-29UV Light Curing Principles
Prepolymer and monomer system
The core of UV curing technology lies in its unique prepolymer-monomer reaction system. The prepolymer Oligomer) serves as the framework structure of the curing material, being a type of polymer with unsaturated double bonds, whose molecular weight lies between the monomer and the polymer. These substances undergo cross-linking reactions under the action of photoinitiators, forming a thre...
The principle of UV curing lamps2026-05-28
An UV
curing lamp is a device that uses ultraviolet radiation to cure coatings. It is
widely used in industrial production and research fields, and can improve
production efficiency and optimize product quality. This article will introduce
the principle of UV curing lamps in detail.
Firstly,
lets understand the characteristics of ultraviolet rays. Ultraviolet rays are
a type of electromagnetic wave with a short wavelength and high ...
The “Tomb” of the incandescent lamp, the road to the new light source of LED lights2019-10-29After Edison, who monopolized the capital market, mass-produced bulbs, the application of bulbs entered an era of rapid progress. According to research data published by Fouquet and Pearson, as we develop from using handmade candles to mass-produced bulbs, the cost of artificial light Over the centuries, it has fallen from thousands of pounds per lumen hour to a fraction of a fraction. The decline in costs caused the consumption of artificial lig...
The Death of the Light Bulb2019-08-28
The Death of the Light Bulb
The incandescent bulb came to life in 1880 in the workshop of Thomas Edison but it was only in 1910 that the tungsten filament lamp as we know today came into being.
Since then for nearly a century the incandescent bulb has continued to be the most popular lighting device. While it is the most popular it isn’t by any means the best lighting solution. The march of technology has meant that the bulb is today co...
Outdoor led street light2019-06-05The relationship between LED street lamp power, lamp pole and height and road width
The height of general lighting is 8 meters, the distance between street lights is generally 30 meters, and the light source can be led150w or high pressure sodium lamp 250w.
First:
Common LED street lamp replaces traditional high pressure sodium lamp w number comparison table:
LED street light w number high pressure sodium lamp pole height
40w 100w 5~6m...
lifespan of an LED Light2018-09-15
What influences the lifespan of an LED Light?
The longer a light source is used, the greater the economic advantage and the green footprint. Depending on the system design, minimal decrease in luminous flux over time is a normal process, the components are getting down. When this process is really slow, the system is staying maintenance free for a long time.
LEDs are better than a lot of light sources in already many applications. To ke...
Future illumination is Laser Lighting or OLED Lighting?2018-07-23
There are currently two basic types of solid-state lighting devices: LED, OLED. Current LEDs are very small in size about one square millimeter) and are extremely bright. Having been developed about 25 years before OLEDs, LEDs are already employed in a variety of lighting products, such as traffic lights, billboards, replacements for incandescent lighting, backlights for smartphones, computer monitors and televisions, and as border or accent l...
LED plant grow light2018-05-28
LED Growth Light adopts the technology of semiconductor lighting technology which is dedicated to the growth of vegetables and flowers. The wavelengths of red and blue are more suitable for the growing, blooming and bearing fruit of vegetables and flowers. The blue light is conducive to the growth of leaves while the red light is to the blooming and bearing fruit. With the high power and the high brightness HIGH POWER LED technology, our 30W G...