News

The Way to a Greener future-LED light tubeThe Way to a Greener future-LED light tube2018-03-16 Whilst our appetite for consuming electricity continues to increase, so does our awareness of the need to maximise its efficiency. One area in which every commercial enterprise could not only harness energy more efficiently but ensure that the environment benefits, is through the replacement of fluorescent tubes by the new LED light emitting diode) tube. Advances in LED technology have enabled LED light tube to be produced which simply ...

Technical TermsTechnical Terms2017-08-24Bus Ballast Ballast Factor BF) Base or Socket Bi-Pin Base Base Temperature Bayonet Current Type AC/DC) Alternating Current AC) Direct Current DC) Circuit Connector Dimmer, Dimming Control D/A Converter Analog Signal Digital Signal Efficacy Efficiency Frequency Hot Restart Time Ignitor/ Starter Instant Start/ Rapid Start Lighting System Operating Position or Burn Position Power Factor PF) Preheat Circuit Response Time ...

LED Lens ApplicationLED Lens Application2017-03-09 In order to facilitate the evaluation process and reduce the developing time and cost of LED street light application, Supernova has developed nine types of street light lenses which are compatible with various LED manufacturers. These lenses are designed with different assumed conditions of the road and pole arrangements to optimise both the uniformity and the output lux value. Technical data, such as ies files , datasheets or the assumed ins...

LED Lighting knowledgeLED Lighting knowledge2017-02-14 A Light Emitting Diode LED) is a semiconductor device which converts electricity into light. LED lighting has been around since the 1960s, but is just now beginning to appear in the residential market for space lighting. At first white LEDs were only possible by “rainbow” groups of three LEDs — red, green, and blue — by controlling the current to each to yield an overall white light. Standard array 18 LED lighting diodesThis changed in 1993 wh...

LED junction temperatureLED junction temperature2016-10-28 LED junction temperature, what is the LED junction temperature, what causes the LED junction temperature, and what are the ways to reduce the LED junction temperature? The following will analyze in detail 1. What is the junction temperature of the High power LED? The basic structure of High power LED is a semiconductor P-N junction. The experiment pointed out that when current flows through the LED element, the temperature of the P-N junction ...

150 lumen per watt Led Tube lights150 lumen per watt Led Tube lights2016-06-22 150 lumen per watt Led Tube lights – Not that there is anything wrong with the old sodium-discharge lamps. Producing practically all their light at a wavelength near the peak sensitivity of the human eye gave them a theoretical luminous efficacy of 200 lumens per watt of electricity consumed, though their real-world performance is around two-thirds that. The new white LEDs used in his street are rated at around 100 lumens per watt. Compact flu...

What is the IP rating system?What is the IP rating system?2016-04-06 The IP Rating describes the enclosure for electronic equipment according to the definition of the European Committee for Electro Technical Standardization. IP is standing for Ingress Protection, the protection of the product against environmental effects like solid objects or liquids. The IP rating consists of two digits which are describing the height of the protection against these effects. The larger the number, the higher the protect...

Heat Pipe TechnologyHeat Pipe Technology2016-02-24 Figure 1: Cross-sectional view of a heat pipe embedded radial heat sink. In light-emitting diodes LEDs), 70 percent to 80 percent of the applied electrical power is converted to waste heat. If this thermal energy is not properly dissipated, the resulting high operating temperatures lead to reduced brightness, shift in wavelength color), and reduced life. Optical requirements impose the heat to be extracted through circuit boards designed to b...

What is COB LEDWhat is COB LED2015-11-18 Cob integrated light source is chip on board, bare chips are glued to the Interconnect substrate with conductive or non-conductive adhesive, and are welded with the golden wires together, which realizes an electrical connection. The features of COB integrated light source as following: 1. Through free collocation and combination, they can be a variety of LED lamps with easy assembly 2. High reliability, no dead lamp, no plaqu...

The importance LED thermal designThe importance LED thermal design2015-10-25 LED is a semiconductor device itself, all of the semiconductor device has a normal operating temperature requirements, including ambient temperature and operating temperature. Ambient temperature semiconductor devices generally have less than 80 degrees of normal, while the internal LED PN junction temperature reaches 140 degrees and they will fail. Normal working temperature of its own that comes out through the pin or special base, which can...

Contact Us

  • Email:Info@ttled.com
  • Mobile: +86-13760309508
  • Add: 9th Floor A2 building,New Era prosperity,Shilong,Shiyan,Shenzhen,China
Copyright © 2008-2027 Shenzhen TTled Lighting co.,Ltd ( China Factory) All rights reserved
wx

ID:TTLED_COM

×