Technical Data Sheet
TT 60mA 2835 Amber 2V
This product is mainly used as an electronic component for signal indication and lighting, and is widely used in various electronic products that use surface mount structures, such as household lighting, lamps, electrical switch indicators, mobile phone keyboard lights, automobile dashboard lighting, and this product is also widely used Used in various indoor and outdoor decorative lighting, monitoring and security products.
Features
• Material: InGaN
• Emitting Color: Yellow
• Encapsulation:Resin
• Soldering methods:Pb-Free reflow soldering
• High Luminous Intensity,Low Power Dissipation,good Reliability and Long Life
• Complied With ROHS Directive
Catalogue
Outline Dimensions 2
Electrical Characteristics 2
Typical Characteristic Curves 3
Reliability Test Items And Conditions 5
Packaging 6
Guideline for Soldering 8
Precautions 9
*The Specifications of the product may be modified for improvement without notice.
Outline Dimension
Recommended Soldering Pad
Electrical Characteristics
Absolute Maximum Ratings(Temperature=25℃)
|
Parameter
|
Symbol
|
Rating
|
Unit
|
|
Forward Current
|
IF
|
Y
|
60
|
mA
|
|
Pulse Forward Current*
|
IFP
|
Y
|
100
|
mA
|
|
Power Dissipation
|
Pd
|
Y
|
138
|
mW
|
|
Reverse Voltage
|
VR
|
Y
|
5
|
V
|
|
Operating Temperature
|
Topr
|
-30°C ~ + 85°C
|
℃
|
|
Storage Temperature
|
Tstg
|
-40°C ~ + 90°C
|
℃
|
* Note: Pulse width≤0.1ms, Duty≤1/10
Electrical Characteristics
Electro-Optical Characteristics (Temperature=25℃)
|
Parameter
|
Symbol
|
Condition
|
Color
|
Min.
|
Typ.
|
Max.
|
Unit
|
|
Luminous Intensity
|
IV
|
IF =60mA
|
Y
|
3
|
5
|
7
|
LM
|
|
Dominant Wavelength
|
nm
|
Y
|
590
|
593
|
593
|
nm
|
|
Peak Wavelength
|
nm
|
Y
|
592
|
595
|
598
|
nm
|
|
Anti static electricity
|
ESD
|
Y
|
2000(HBM)
|
V
|
|
Forward Voltage
|
VF
|
Y
|
2.0
|
2.3
|
2.6
|
V
|
|
Reverse Current
|
IR
|
VR=5V
|
Y
|
---
|
---
|
5
|
uA
|
|
View Angle
|
2θ1/2
|
IF = 60mA
|
Y
|
---
|
120
|
---
|
deg
|
Typical Characteristics Curves
Wavelength Groups (Dominant Wavelength IF=60Ma)
|
Wavelength Groups
|
Min(nm)
|
Max(nm)
|
|
Y1
|
590
|
593
|
|
Y2
|
593
|
596
|
|
Y3
|
595
|
598
|
Brightness Groups(IF=60Ma,)
|
Brightness Groups
|
MIN(lm)
|
MAX(lm)
|
|
A2
|
2
|
3
|
|
B2
|
3
|
5
|
|
C2
|
5
|
8
|
Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of 3 or 4 or 6 individual brightness groups.Individual brightness groups cannot be ordered.
Group Name on Label
Example: Y2 –C2
|
Brightness Group
|
Wavelength
|
|
Y2
|
C2
|
Note: No packing unit / tape ever contains more than one group for each selection.
Typical Characteristics Curves
Relative Spectral Emission
V(λ) = Standard eye response curve Φrel = f (λ); TA = 25 °C; IF = 60mA
Radiation Characteristic Φrel = f (ϕ); TA = 25 °C
Reliability Test Items And Conditions
|
Test Items
|
Reference
|
Test Conditions
|
Time
|
Quantity
|
Criterion
|
|
Thermal Shock
|
MIL-STD-202G
|
-40 ℃(30min) ~ +100℃(30min)
|
100 cycles
|
22
|
0/22
|
|
Temperature And Humidity Cyclic
|
JEITA ED-4701 200 203
|
-10 ℃~+65℃,0%~90%,
24 hrs./1cycle
|
10 cycles
|
22
|
0/22
|
|
High Temperature Storage
|
JEITA ED-4701 200 201
|
Ta=100℃
|
1000 hrs
|
22
|
0/22
|
|
Low Temperature Storage
|
JEITA ED-4701 200 202
|
Ta=-35℃
|
1000 hrs
|
22
|
0/22
|
|
High Temperature High Humidity Storage
|
JEITA ED-4701 100 103
|
Ta=80℃
RH=90%
|
1000 hrs
|
22
|
0/22
|
|
High Temperature Life Test
|
JESD22-A108D
|
Ta=80℃
IF=60mA
|
1000 hrs
|
22
|
0/22
|
|
Life Test
|
JESD22-A108D
|
Ta=25℃
IF=60mA
|
1000 hrs
|
22
|
0/22
|
|
Resistance to Soldering Heat
|
JEITA ED-4701 300 301
|
Reflow Soldering
|
3 times
|
22
|
0/22
|
Criteria For Judging Damage
|
Items
|
Symbol
|
Test Conditions
|
Criteria For Judging Damage II
|
|
Forward Voltage
|
VF
|
IF=60mA
|
≧USL
|
|
Reverse Current
|
IR
|
VR=5V
|
≧USL
|
|
Luminous Intensity
|
IV
|
IF=60MA
|
≦LSL
|
|
Resistance to Soldering Heat
|
|
|
Meterial without internal cracks,no meterial between stripped,no deaded light.
|
USL:Upper Standard Level, LSL:Lower Standard Level
Packaging(1)
Carrier Tape
Notes:
1. All dimensions are in millimeters ;
2. Tolerance is ± 0.1 mm unless otherwise noted.
(1). Keep away from water, moisture in order to protect the LEDs.
(2). The LEDS may be damaged if the boxes are dropped or receive a strong impact against them. so precautions must be taken to prevent any damage.
Packaging(2)
Moisture Proof and Anti-Electrostatic Foil Bag
Label Explanation
Part No: MH
QTY: Quantity
LOT NO: Lot Number
IV: Wavelength Range
λd: Luminous Intensity Range
VF: Forward Voltage Range
IF: Testing Current
Guideline for Soldering
Hand Soldering
A soldering iron of less than 20W is recommended to be used in Hand Soldering.Please keep the temperature of the soldering iron under 300℃ while soldering.Each terminal of the LED is to go for less than 3 second and for one time only.
Be careful because the damage of the product is often started at the time of the hand soldering.
Reflow Soldering:Use the conditions shown in the under Figure of Pb-Free Reflow Soldering.
Reflow soldering should not be done more than one times.
Stress on the LEDs should be avoided during heating in soldering process.
After soldering,do not deal with the product before its temperature drop down to room temperature.
Cleaning
It is recommended that alcohol be used as a solvent for cleaning after soldering. Cleaning is to go under 30℃ for 3,minutes or 50℃ for 30 seconds. When using other solvents, it should be confirmed beforehand whether the solvents will dissolve the package and the resin or not. Ultrasonic cleaning is also an effective way for cleaning. But the influence of Ultrasonic cleaning on LED depends on factors such as ultrasonic power. Generally, the ultrasonic power should not be higher than 300W. Before cleaning, a pre-test should be done to confirm whether any damage to LED s will occur.
* Note:This general guideline may not apply to all PCB designs and configurations of all soldering equipment. The technique in practice in practice is influenced by many factors, it should be specialized base on the PCB designs and configurations of the soldering equipment..
Precautions
Storage
Moisture proof and anti-electrostatic package with moisture absorbent absorbent material is used ,to keep moisture yo a minimum.
Before opening the package, the product should be kept at 30℃ or less and humidity less than 60% RH , and be used within a year.
After opening the package, the product should be stored at 30℃ or less and humidity less than 10% RH, and be soldered within 168 hours (7 days). It is recommended that the product be operated at the workshop condition of 30℃ or less and humidity less than 60%RH.
If the moisture absorbent material has fade away or the LED s have exceeded the storage time, treatment should be performed based on the following condition:(60±5)℃ for 24 hours.
Design Consideration
In designing a circuit, the current through each LED must not exceed the absolute maximum rating specified for each LED.In the meanwhile resistors for protection should be applied,otherwise slight voltage shift will cause big current change,burn out may happen.
It is recommended to use Circuit A which regulates the current flowing through each LED rather than Circuit B. When driving LED s with a constant voltage in Circuit B, the current through the LED s may vary due to the variation in Forward Voltage (VF) of the LED s In the worst case, some LED may be subjected to stresses in excess of the Absolute Maximum Rating.
Thermal Design is paramount importance because heat generation nay result may result in the Characteristics decline, such as brightness decreased, Color changed and so on. Please consider the heat generation of the LED s when making the system design.
Precautions
Others
When handling the product, touching the encapsulant will not only contaminate its surface, but also affect on its optical. Excessive force to the encapsulant might result in catastrophic failure of the LED s due to die breakage or wire deformation. For this reason, please do not put excessive stress on LED s, especially when the LED s are heated such as during Reflow Soldering.
The epoxy resin of encapsulant is fragile, so please avoid scratch or friction over the epoxy resin surface. While handling the product with tweezers, do not hold by the epoxy resin, be careful.
Safety Advice For Human Eyes
Viewing direct to the light emitting center of the LED s, especially those of great Luminous lntensity will cause great hazard to human eyes. Please be careful.